WIP Kawanishi N1K-2J Shiden Kai

If it flies, store it in the aviation hangar.
User avatar
kevjon
Soldier
Posts: 37
Joined: Sun May 21, 2006 9:04 am
Primary Application: Blender

Re: WIP Kawanishi N1K-2J Shiden Kai

Post by kevjon »

Looking great Nils

I think the bump is a little strong at this stage but something that can be tweaked later on.
User avatar
Nils
Regular
Posts: 52
Joined: Sat Aug 27, 2022 8:50 pm
Location: Norway

Re: WIP Kawanishi N1K-2J Shiden Kai

Post by Nils »

Update on the last textures, I've might gotten a bit carried away on scraping away paint, but here's the current state of it and a test of a composition with the B29 at the bottom:
Image
Image
Image
User avatar
kevjon
Soldier
Posts: 37
Joined: Sun May 21, 2006 9:04 am
Primary Application: Blender

Re: WIP Kawanishi N1K-2J Shiden Kai

Post by kevjon »

Looking good nils.
I think you need to weather your markings to match the wear of the extensive paint chipping.
User avatar
Trak-Tor
Posts: 8
Joined: Thu Sep 29, 2022 7:56 am
Primary Application: Rhino

Re: WIP Kawanishi N1K-2J Shiden Kai

Post by Trak-Tor »

Very nice!
User avatar
cobra6
Site Admin
Site Admin
Posts: 26
Joined: Sat May 20, 2006 4:08 am

Re: WIP Kawanishi N1K-2J Shiden Kai

Post by cobra6 »

Also, make sure your paint chipping is not blurry, paint is either on or off if it happens due to environmental causes/airframe stress.

Blurry paint chipping through friction/rubbing is something you'd pretty much only expect where humans interact with the object. Which isn't really the side of the fuselage between the cockpit and the tail marking :D
Post Reply