German Flak 88mm cannon - Page 2 - Military-Meshes.com

Meshfan · 05-23-2006, 11:17 PM

Wow. Very nice.

*Mans gun and shoots down a coupla of fighters*

Skyraider3D · 05-24-2006, 6:56 PM

*does split-S and strafes gun, which has become useless against aircraft at low altitude*

ThePhobos, o yea you told me before

Sorry for repeating myself.
At work I regularly need to deal with outsourced models and one thing I'm allergic to is people not assigning smoothing groups!

Meshfan · 05-25-2006, 3:24 AM

*curses and puts in another belt of ammo*

*misses again and gets killed by skyraider*

I hope to see that Flak cannon in color!

ThePhobos · 05-29-2006, 5:40 PM

Well, here's what I would consider a major update to the right side. I have gotten most of the parts done, and I even went through some of the stuff on the left side that I missed (small parts). It's so nice to have graduated and to have the time to work on this now!

Another thing to note - this render is from Modo 201, so you can finally see all of the subd work I've been doing but have never been able to show off fully. So you can see now that the things that should be smooth are (and always have been)

As always, it's a big render. 1600x1200 and 150k. I like to render large given how much detail I put in.

Right side2.jpg

Skyraider3D · 05-29-2006, 6:02 PM

!!!!!!!!!!!!!

Meshfan · 05-29-2006, 7:32 PM

Omg. Look At That Detail.

Spinner · 05-29-2006, 7:49 PM

Bloody superb!
There is one teeny weeny pivot point that wants attention.
Its just that the rest is so good it catches my eye.
Down towards the lower right corner.

ThePhobos · 05-30-2006, 12:17 AM

Thanks guys. I feel much better about these kinds up updates than I did with those tiny ones before. Been really putting in some long hours on this thing (like, up until 3am every night) so it really feels good to get some nice feedback on it.

Spinner: Can you point out the piece you're talking about? That bottom right piece was the last one I did, so I wouldn't doubt I didn't mess something up. Maybe take my pic and Photoshop an arrow over top of it pointing to what you mean? I certainly don't want to butcher this thing at this point. hehe

Thanks guys! More to come soon!

Spinner · 05-30-2006, 4:47 AM

Sorry M8, I dont want to dump on your model. Its too good for that.
Just this little bit caught my eye.

ThePhobos · 05-30-2006, 5:16 AM

Holy cow! I never noticed how bad that part looks. That was when I was still learning Modo. Yowza. I do appreciate you pointing that out, especially given how bad it looks. That's really the reason I was posting this on here - for the constructive criticism like this. While it's nice to hear how much you guys enjoy it, I truly enjoy hearing how I can change it. I'll go back and redo that whole section now that I know what I'm doing. Thanks man!

05-24-2006, 6:56 PM	#12
Skyraider3D Regulator Join Date: May 2006 Location: UK Posts: 4,107 Downloads: 3 Uploads: 0 Total Awards: 1 (more» ...)	does split-S and strafes gun, which has become useless against aircraft at low altitude ThePhobos, o yea you told me before Sorry for repeating myself. At work I regularly need to deal with outsourced models and one thing I'm allergic to is people not assigning smoothing groups! __________________ Aviation art & photography gallery @ www.skyraider3d.com Prints & T-shirts available @ www.digitalaviationart.com

05-29-2006, 6:02 PM	#15
Skyraider3D Regulator Join Date: May 2006 Location: UK Posts: 4,107 Downloads: 3 Uploads: 0 Total Awards: 1 (more» ...)	!!!!!!!!!!!!! __________________ Aviation art & photography gallery @ www.skyraider3d.com Prints & T-shirts available @ www.digitalaviationart.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

05-23-2006, 11:17 PM	#11
Meshfan Regular Join Date: May 2006 Location: Paris, France Posts: 101 Downloads: 0 Uploads: 0	Wow. Very nice. Mans gun and shoots down a coupla of fighters

05-25-2006, 3:24 AM	#13
Meshfan Regular Join Date: May 2006 Location: Paris, France Posts: 101 Downloads: 0 Uploads: 0	curses and puts in another belt of ammo misses again and gets killed by skyraider I hope to see that Flak cannon in color!

05-29-2006, 5:40 PM	#14
ThePhobos Conscript Join Date: May 2006 Posts: 14 Downloads: 0 Uploads: 0	Well, here's what I would consider a major update to the right side. I have gotten most of the parts done, and I even went through some of the stuff on the left side that I missed (small parts). It's so nice to have graduated and to have the time to work on this now! Another thing to note - this render is from Modo 201, so you can finally see all of the subd work I've been doing but have never been able to show off fully. So you can see now that the things that should be smooth are (and always have been) As always, it's a big render. 1600x1200 and 150k. I like to render large given how much detail I put in. Right side2.jpg

05-29-2006, 7:32 PM	#16
Meshfan Regular Join Date: May 2006 Location: Paris, France Posts: 101 Downloads: 0 Uploads: 0	Omg. Look At That Detail.

05-29-2006, 7:49 PM	#17
Spinner General Join Date: May 2006 Location: 'nother Aussy Posts: 720 Downloads: 0 Uploads: 0	Bloody superb! There is one teeny weeny pivot point that wants attention. Its just that the rest is so good it catches my eye. Down towards the lower right corner.

05-30-2006, 12:17 AM	#18
ThePhobos Conscript Join Date: May 2006 Posts: 14 Downloads: 0 Uploads: 0	Thanks guys. I feel much better about these kinds up updates than I did with those tiny ones before. Been really putting in some long hours on this thing (like, up until 3am every night) so it really feels good to get some nice feedback on it. Spinner: Can you point out the piece you're talking about? That bottom right piece was the last one I did, so I wouldn't doubt I didn't mess something up. Maybe take my pic and Photoshop an arrow over top of it pointing to what you mean? I certainly don't want to butcher this thing at this point. hehe Thanks guys! More to come soon!

05-30-2006, 4:47 AM	#19
Spinner General Join Date: May 2006 Location: 'nother Aussy Posts: 720 Downloads: 0 Uploads: 0	Sorry M8, I dont want to dump on your model. Its too good for that. Just this little bit caught my eye.

05-30-2006, 5:16 AM	#20
ThePhobos Conscript Join Date: May 2006 Posts: 14 Downloads: 0 Uploads: 0	Holy cow! I never noticed how bad that part looks. That was when I was still learning Modo. Yowza. I do appreciate you pointing that out, especially given how bad it looks. That's really the reason I was posting this on here - for the constructive criticism like this. While it's nice to hear how much you guys enjoy it, I truly enjoy hearing how I can change it. I'll go back and redo that whole section now that I know what I'm doing. Thanks man!